Lorenz Messtechnik GmbH   Measurement Electronics

LCV-USB3

 

        

LCV-USB3-Sensor Interface with freely available Configuration and Evaluation Software VS3. 

The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. 

Through the Measuring Rate 5000/s, high-dynamic Measurements are realizable. This Measuring Amplifier is also very suitable for rough Industry Applications by the high Level of Protection IP67 of the Housing, It is also available as a Board without Housing which allows direct Integration in many Sensors.

 

 

SI-USB 2 Channel USB-Sensor Interface with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to 2500/s, high-dynamic Measurements are realizable. This Measuring Amplifier is also very suitable for heavy Industry Applications by its robust Alu­minum Die Cast Housing.
  SI-USB

 

      

 

 

 

 

 

SI-RS485

     

 

 

 

2 Channel RS485-Sensor Interface with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the RS485 Interface. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to high-dynamic Measurements are realizable. This Measuring Amplifier is also very suitable for heavy Industry Applications by its robust Alu­minum Die Cast Housing.


 

 

 

SI-ETH

        

     

 

 

 

 

2 Channel Ethernet-Sensor Interface SI-ETH with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the Ethernet Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up 2500/s, high-dynamic Measurements are realizable.

     

  

SI-USB3

 

   

 

 

4 Channel USB-Sensor Interface with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. Through the Measuring Rate of up to 5000/s, high-dynamic Measurements are realizable. This Measuring Amplifier is also very suitable for heavy Industry Applications by its robust Aluminum Die-Cast Housing.

           

 

 

 

,

  www.ntt.dk           info@transducer.dk