Torque Sensors, Torque TransducersDigital USB based Torque Transducer |
||||
|
|
|
|||
|
Process Control Equipment |
||||
Rotating Contact less |
||||
|
Steel Flexible couplings Rotating |
Non-Rotating (Static)
|
||
| Rotating with Slip ring | Type |
Measuring Range [N·m] | Accuracy Class |
Speed / Angle | Mechanical Connection | Suitable Coupling |
PDF-Datasheet  |
 |
DR-1 | 1..5000 | 0.1 | - | Male Square Drive / Female Square Drive |
|
DR-1.pdf |
 |
DR-2 | 1..500 | 0.1 | - | Shaft with Keyway | 1..20Nm.pdf |
DR-2.pdf |
 |
DR-12 | 1..5000 | 0.1 | X | Male Square Drive / Female Square Drive | - |
DR-12.pdf |
 |
DR-20 | 1..500 | 0.1 | X | Shaft with Keyway | 1..20Nm.pdf |
DR-20.pdf |
 |
DR-2291 | 1..20 | 0.1 | - | ¼" Hexagon Drive / Quick Change Chuck | - |
DR-2291.pdf |
 |
DR-2335 | 1..20 | 0.1 | X | ¼" Hexagon Drive / Quick Change Chuck | - |
DR-2335.pdf |
| Rotating Contactless | Type |
Measuring Range [N·m] | Accuracy Class |
Speed / Angle | Mechanical Connection | Suitable Coupling |
PDF-Datasheet |
 |
DR-2112 DR-2412 |
0.03..20000 | 0.1 | X | Shaft |
|
DR-2112.pdf |
|
DR-2112-R DR-2412-R |
0.1..1000 | 0.2 | X | Shaft |
DR-2112-R.pdf |
|
 |
DR-2477 | 0.2..200 | 0.25 | - | Shaft |
|
DR-2477.pdf |
 |
DR-2113 DR-2413 |
0.1..5000 | 0.1 | X | Male Square Drive / Female Square Drive | - |
DR-2113.pdf |
|
DR-3001 | 0.1..5000 | 0.1 | X | 1/4" to 1.1/2"
Male Square Drive / Female Square Drive |
USB Digital |
DR-3001.pdf |
 |
DR-2493 | 0.1..5000 | 0.25 | X | Male Square Drive / Female Square Drive | - |
DR-2493.pdf |
 |
DR-2114 DR-2414 |
0.1..20 | 0.1 | X | ¼" Hexagon Drive / Quick Change Chuck | - |
DR-2114.pdf |
 |
DR-2153 DR-2453 |
0.1..20 | 0.1 | X | ¼" Hexagon Drive / Quick Change Chuck | - |
DR-2153.pdf |
 |
DR-2494 | 0.1..20 | 0.25 | X | ¼" Hexagon Drive / Quick Change Chuck | - |
DR-2494.pdf |
|
|
DR-3003 | 0.1..20 | 0.1 | X | ¼" Hexagon Drive / Quick Change Chuck |
USB Digital |
DR-3003.pdf |
 |
DR-2208 DR-2508 |
Dual-Range Sensor 1/10..2000/20000 |
0.1 | X | Shaft |
|
DR-2208.pdf |
 |
DR-2212 DR-2512 |
0.03..20000 | 0.1 | X | Shaft |
DR-2212.pdf |
|
|
DR-2212-R DR-2512-R |
0.1..1000 | 0.2 | X | Shaft |
|
DR-2212R.pdf |
 |
DR-2531 DR-2831 |
Dual-Range Sensor 0.5/5..1000/10000 |
0.1 | X | Shaft |
DR-2531.pdf |
|
 |
DR-3000 | 0.5..5000 | 0.1 | X | Shaft | . |
DR-3000.pdf
|
|
USB Digital
|
|||||||
 |
MR-12 | 20..5000 Sensor for Belt- Pulleys |
0.1 | - | Mounting- Hole with Keyway |
- |  |
 |
DR-2552 | 50...1000
Bearing less |
0.1 | Option
Only speed |
Disk Hub
Clamping Ring Hub Keyway Hub
|
DR-2552.pdf
|
|
|
|
DR-2800 | 50...5000
Bearing less
|
0.1 | Option
Only speed
|
Flange |
|
|
 |
DR-2500 DR-2600 |
0.005..150 Miniature Torque Sensor without Bearings |
0.1 | X | Shaft | A lot of coupling examples to come shortly |
DR-2500.pdf |
 |
DR-2371 | 100N/2N·m.. ..500N/5N·m Torque, force-, revolution- and rotation- angle measuring |
0.4 (F) ; 0.2 (Mt) |
X | Shaft with Keyway / External Thread | |
DR-2371.pdf |
| Non-Rotating (Static) | Type |
Measuring Range [N·m] | Accuracy Class |
Range of Application | Mechanical Connection | Suitable Coupling |
PDF-Datasheet |
 |
DV-14 | 2..5000 | 0.1..0.2 | Survey of Assembly Tools for Screws and Nuts | Male Square Drive / Female Square Drive |
- |
DV-14.pdf |
 |
DH-15 | 0.005..20 | 0.1..0.2 | For Very Small Ranges | Flange with Spigot / Shaft | - |
DH-15.pdf |
 |
D-2452 | 0.005..20000 | 0.1 | Reaction Torque Measurement, e.g. Extruder |
Shaft | - |
D-2452.pdf |
 |
D-2431 | 0.2..20 | 0.1 | Survey of Assembly Tools for Screws and Nuts | ¼" Hexagon Drive / Quick Change Chuck | - |
D-2431.pdf |
 |
DFW-25 | 10..1000 | 0.1..0.2 | Compact Design | Flange with Center Hole / Shaft with Keyway | - |
DFW-25.pdf |
 |
D-2553 | 10..200 | 0.1 | Compact Design | Flange with Large Through Hole and Center Counter Bore | - |
D-2553.pdf |
 |
D-2209 | 1..5 | 0.2 | Compact Design | Flange with Spigot | - |
DF-30.pdf |
 |
DF-30 | 10..20000 | 0.1..0.2 | Compact Design | Flange with Center Hole | - |
DF-30.pdf |
 |
DFW-35 | 2..2000 | 0.1..0.2 | Survey of Assembly Tools for Screws and Nuts | Flange with Center Hole / Square |
- |
DFW-35.pdf |
 |
D-2223 | 2..5000 | 0.1..0.2 | Survey of Assembly Tools for Screws and Nuts | Flange with Center Hole / Square Socket | - |
D-2223.pdf |
 |
D-2268 | 100..5000 | 0.1 | Short Design | Flange | - |
|
 |
LCV-USB2 | USB load cell to PC communication |  |
LCV-USB.pdf |
|||
Since 1985, Lorenz Messtechnik GmbH has been producing torque sensors in
many different designs. Lorenz torque cells are appreciated by a continuous
increasing number of customers not only because of their accuracy, but also
because of their variety and their dependability.
Rotating torque transducers with slip rings and rotating contact less torque transducers are produced; even static torque sensors can be found in our range of products.
A speed-/ angle- sensor , which is integrated in the torque dynamometer , is available for many rotating torque cells. Lorenz Messtechnik GmbH produces torque transducer with a final measurement range from 0.005 N·m up to 20000 N·m.
Since October 2003, torque meters can be calibrated from Lorenz Messtechnik GmbH in its own DKD calibration laboratory with a relative uncertainty of measurement of 1 x 10-4. Torque pick ups of Lorenz Messtechnik GmbH gain in importance in more and more application ranges, e. g. quality assurance of the automobile industry, monitoring of mounting processes, research and development.
Rotating torque transducers with slip rings and rotating contact less torque transducers are produced; even static torque sensors can be found in our range of products.
A speed-/ angle- sensor , which is integrated in the torque dynamometer , is available for many rotating torque cells. Lorenz Messtechnik GmbH produces torque transducer with a final measurement range from 0.005 N·m up to 20000 N·m.
Since October 2003, torque meters can be calibrated from Lorenz Messtechnik GmbH in its own DKD calibration laboratory with a relative uncertainty of measurement of 1 x 10-4. Torque pick ups of Lorenz Messtechnik GmbH gain in importance in more and more application ranges, e. g. quality assurance of the automobile industry, monitoring of mounting processes, research and development.